Car Alloy Wheels: Technology

The technology behind making these alloy car wheels now a days is far more sophisticated than it was 2 years back. Car alloy wheels are now much lighter and stronger than the general steel cousins. This not only reduces the weight of the auto but they’re also designed with more surface area touching the road increasing grip and performance of the wheels, so skyrocketing speed, handling, wear of the tyres and can often reduce fuel spending noticeably. If all this information makes you confused and over whelmed then you can research on the internet and then make your final decision.

Cleaning Alloy Car Wheels

Pre-rinse the wheels using a fine spray to remove any brake dust or debris. Remove tar stains with a commercial tar remover and a soft cotton cloth. Add some wheel cleaner to the bucket then fill it with warm water. Follow the manufacturer’s directions to determine how much wheel cleaner to use. Dip the sponge into the soapy solution. Then wash the wheels, being careful not to rub too hard. When the solution becomes dirty, empty the bucket and mix a fresh batch.

Advantages of Alloy Wheels in a Car

Alloy wheels are made of designer metals, usually comprised of aluminum and other metals in a proprietary formula that differs by manufacturer. They can also be purchased from local wheel and tire shops and can be special ordered if not in stock. Alloy wheels have a number of advantages, including enhancing both the aesthetics and performance of a vehicle.

Parts Washing Systems For Auto Industry Use

Parts washers play a major role in industrial parts cleaning and are used to thoroughly clean complex parts that have grease, dirt, and contaminant build up. They are several types of cleaners to address different part shapes as well as cleaning methods.

For example, conveyor parts washers are a very flexible washing system and is one of the common types of parts washers. This kind of washing system allows you to install and manipulate it with regard to fitting to your floor space.

These systems can adapt to the washing action as well. Such flexibility allows the conveyor belt to be changed to fit different parts as necessary with a minimal amount of reconfiguration downtime. The major setback of this method however, is the constant motion by the part.

Actually, parts washers are often used in the automobile industry and they originally designed to support the function of soak tanks. Soak tanks are filled with a mixture of detergent and water that attempts to lessen the grime, fluids, tars or oil build up prior to dis-assembly and repair of the auto part.

Heated parts washers are a common type of cleaning system also used in auto shops for cleaning complex parts with hard to reach areas such as coils, carburetors, and threaded screws.